The treatment plan was as follows:
1) extractions of #32, 42, 44 and 45
2) implant placement at sites #32, 35, 37, 42, 44, 46 and 47
Intra-oral photograph of after the extractions.
The Neo NaviGuide was placed in the mouth.
Tissue punch (200RPM)
Soft tissues on the planned implant sites were removed using a tissue punch.
Bone trimmer (200RPM) was used to remove residual alveolar bone and flattening the bone level.
A point drill (200RPM) was used for initial drilling.
Ø 2.2 drill (200RPM)
Ø 3.0 drill (50RPM)
Ø 3.5 drill (50RPM)
Ø 4.0 drill (50RPM)
IS-III active Ø 4.0x10mm (50RPM) fixture was placed in the area of #44.
Ø 4.5 drill (50RPM)
Ø 5.0 Cortical Tap (30~50RPM)
IS-III active Ø 5.0x8.5mm (50RPM) fixture was placed in the area of #46.
IS-III active Ø 5.0x7.3mm (50RPM) fixture was placed in the area of #47.
The fixture was finally tightened with the torque ratchet.
Ø 4.5 Cortical Tap (30~50RPM)
IS-III active Ø 4.5x10mm (50RPM) fixture was placed in the area of #35.
IS-III active Ø 4.5x7.3mm (50RPM) fixture was placed in the area of #37.
Ø 1.2 drill (200RPM)
Ø 1.5 drill (50RPM)
Ø 2.0 drill (50RPM)
Ø 2.5 drill (50RPM)
CMI S-mini (Neobiotech, Korea) fixtures were placed in the area of #32 and 42.
S-mini Ø 3.0x13mm (50RPM)
After the surgery
Bone Profile (50RPM)
Implants were placed successfully.
After the surgery
After the surgery
Post-op panorama
Click on the image to see clinical video.
Comments